CSG Pura Olive Wax is the olive wax in Cereria San Giacomo’s CSG Pura range, made for moulded candles. It is made entirely from olive oil, with no paraffin and no soy, and comes as ivory beads with a neutral scent that are easy to weigh out and melt.
It melts at 55–65 °C and has a medium hardness: it fills the mould well, picks up its details and stays workable, which also makes it suitable for decorative candles and more elaborate figures. Pour it into preheated moulds and, for larger shapes, top up once before the wax has fully cooled.
Its neutral scent and ivory colour leave room for fragrance and colour: from natural-toned candles to the full shades of our candle dye flakes.
The wax on its own is not classified as hazardous: it carries no CLP pictograms and ships without restrictions. Store it in a cool, dry place between 5 and 25 °C, away from light and moisture.
Available in 1, 5 and 20 kg packs.
Technical data sheet
CSG Pura Olive Wax
Olive wax beads for moulded candles and decorative figures
For moulds
100% oliveNo paraffin or soyNot classified as hazardousAlso for decorative figures
Valori chiave
Melting point55–65 °CASTM D3954
Congealing50–60 °CASTM D938
Hardness30–45 dmmpenetration at 25 °C, medium
Pouring70–75 °Cstarting point to test
Fragranceup to 10%check with your own tests
Storage5–25 °Cnever above 30 °C
Format: ivory beadsOdour: neutralViscosity: 9–16 cSt at 100 °C
Le temperature in un colpo d'occhio
20°30°40°50°60°70°80°90°100°
55 °C congealing
70–75 °C fragrance + pouring
Melt at about 75–80 °C, let it cool to 70–75 °C, add the fragrance and pour into moulds preheated to 45–50 °C.
Calcola cera e fragranza
Cera–
Fragranza–
Totale candela–
Oltre il 10% la fragranza può trasudare: il produttore non lo consiglia.
Stima con densità 0,9 g/ml e contenitore riempito al 100%. La percentuale è calcolata sul peso della cera.
Highlights
•Workability: medium hardness, picks up mould details well, also suitable for decorative figures.
•Colour: ivory beads with a neutral scent, leave room for fragrance and dyes.
•Composition: olive oil only, no paraffin or soy.
•Safety: not classified as hazardous, no CLP pictograms.
How to work with it
1Melt to about 75–80 °C, stirring, without keeping it hot for long.
2Colour with dye flakes, 1–2 g per kg of wax.
3Preheat clean moulds to 45–50 °C.
4Scent at pouring temperature, up to 10%.
5Pour at 70–75 °C; for large shapes, top up before the wax has fully cooled.
6Wait let it cool undisturbed, burn test after 48 h.
Troubleshooting
!Won’t release from the mould: warmer mould, pour 5–10 °C hotter.
!Details not sharp: preheat the mould and pour slowly and steadily.
!White bloom (frosting): typical of plant waxes; a preheated mould and slow cooling reduce it.
!Fragrance on the surface: stay within 10% and use fragrances suitable for natural waxes.
!Sinkhole in the centre: top up with slightly hotter wax.
!Tunneling or soot: larger or smaller wick; trim to 6 mm.
Documents and safety
•CLP label: the wax alone carries no pictograms; the scented candle does, depending on the fragrance. Use the CLP label generator.
•Molten wax: risk of burns; wear gloves and goggles and work in a ventilated room.
•Storage: cool, dry, ventilated place between 5 and 25 °C, away from sunlight, moisture and strong oxidisers.