
Technical data sheet
CSG Pura Rapeseed Wax
Rapeseed wax microbeads for moulded and pillar candles
For moulds
100% rapeseedNo paraffin or soyNot classified as hazardousFor moulds and pillars
Valori chiave
Melting point
55–65 °CASTM D3954
Congealing
30–50 °CASTM D938
Hardness
~20 dmmpenetration at 25 °C, hard wax
Pouring
70–75 °Cstarting point to test
Fragrance
up to 10%check with your own tests
Flash point
above 180 °Cnever heat anywhere near this
Format: light ivory microbeadsDensity: 0.90 g/cm³Odour: almost none
Le temperature in un colpo d'occhio
60 °C melting
70–75 °C fragrance + pouring
Melt at about 75–80 °C, let it cool to 70–75 °C, add the fragrance and pour into moulds preheated to 45–50 °C.
Calcola cera e fragranza
Cera–
Fragranza–
Totale candela–
Oltre il 10% la fragranza può trasudare: il produttore non lo consiglia.
Stima con densità 0,9 g/ml e contenitore riempito al 100%. La percentuale è calcolata sul peso della cera.
Highlights
Hardness: hard wax, stable shapes and crisp edges.
Colour: light ivory and almost odourless, leaves room for fragrance and dyes.
Composition: rapeseed oil only, no paraffin or soy.
Safety: not classified as hazardous, no CLP pictograms.
How to work with it
Melt to about 75–80 °C, stirring.
Colour with dye flakes, 1–2 g per kg of wax.
Preheat clean moulds to 45–50 °C.
Scent at pouring temperature, up to 10%.
Pour at 70–75 °C; for large pillars, top up before the wax has fully cooled.
Wait let it cool undisturbed, burn test after 48 h.
Troubleshooting
Won’t release from the mould: warmer mould, pour 5–10 °C hotter.
White bloom (frosting): typical of plant waxes; a preheated mould and slow cooling reduce it.
Fragrance on the surface: stay within 10% and use fragrances suitable for natural waxes.
Sinkhole in the centre: top up with slightly hotter wax.
Tunneling or soot: larger or smaller wick; trim to 6 mm.
Documents and safety
CLP label: the wax alone carries no pictograms; the scented candle does, depending on the fragrance. Use the CLP label generator.
Molten wax: risk of burns; wear gloves and goggles and work in a ventilated room.
Storage: cool, ventilated place below 25 °C, away from strong oxidisers.
Abbinamenti consigliati
Valori tipici: verifica sempre con i tuoi test di combustione.

